Hyundai Equus: Line Pressure Control Solenoid Vale Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Line Pressure Control Solenoid Vale Description and Operation
| Description |
Line presure control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the line presure .
8LR Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Line Pressure Control Solenoid Vale Specifications
Specifications
Line Pressure Control VFS
x Control type : Normal high type
Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...
See also:
Repair procedures
Adjustment
1.
After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or right or left.
2.
Adjust the trunk lid height by turning the trunk lid ove ...
Electronic Hydraulic Power Steering (EHPS)
This system uses an electromotor to assist you with steering the vehicle.
If the engine is turned off or if the EHPS becomes inoperative, you may still
steer the vehicle, but it will require increa ...
Mic Repair procedures
Removal
1.
Remove the hands free mic (A) from the roof trim.
Installation
1.
Install the hands free mic after connecting the mic connector.
Inspection
1.
Remove the handsfree mic (A) aft ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com