Removal |
1. |
Remove the negative(-) battery terminal. |
2. |
Remove the seats in the car.
(Refer to Body - "Front Seat Assembly") |
3. |
Remove the IMS & PSM module (A) after loosening 4 screws and 4 connectors in the botton of seat. |
Installation |
1. |
Reassemble the IMS & PSM module after connecting the connectors. |
2. |
Reassemble the seats in the car. |
Components and Components Location
Component Location
1. Engine room junction box & FAM (Front Area Module)2. SJB (Smart Junction Box)3. Engine Room Fuse & relay box4. Passenger compartment relay box (RH)
...
Electronic Active Headrest Repair procedures
Inspection
1.
How to reassemble the Headrest which was released by rear (or front) Impact.
2.
How to unlock the trigger in case of trigger is locked.
(1)
Normally, the trigger position is un ...
Power Door Lock Actuators Repair procedures
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
3.
...