Hyundai Equus: Middle Speed Sensor Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Middle Speed Sensor Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Middle Speed Sensor Description and Operation
| Description |
The middle speed sensor measures the rate of rotation of the
6C outer drum inside the transmission and delivers the readings to the
TCM.
Input Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Middle Speed Sensor Specifications
Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F ((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltage(V)High1.4Low0.7
...
See also:
Front Seat Frame Assembly Components and Components Location
Component Location
1. Front seat back frame assembly2. Front seat cushion frame assembly
...
Repair procedures
Inspection
System Parameterization
Parameterization of the system has to be performed to find
the amount of pulses needed to open the trunk. Due to tolerances not
every car is equal. Therefore ...
Temperature Control Actuator Description and Operation
Description
The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com