>
Replacement |
1. |
Remove the air cleaner (A). |
2. |
Loosen the nut and then remove the air filter (A). |
3. |
Remove the front bumper.
(Refer to Body - "Front Bumper") |
4. |
Remove the left head light.
(Refer to Body Electrical System - "Head Lamp Leveling Device") |
5. |
Disconnect the all connecter. |
6. |
Remove the mounting bolt, pressure hose (A), return hose (B).
|
7. |
Installation is the reverse of the removal. |
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...
Fuel Filler Door Open Switch Repair procedures
Inspection
1.
Remove the front door trim panel.
(Refer to BD group - "Front door")
2.
Check the switch (A) for continuity between the terminals.
3.
If the continuity is not as specified, ...
Output Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...