>
Fuel Filler Door Release Actuator Repair procedures
Inspection
1.
Remove the trunk room left side trim.
2.
Open the fuel filler door and remove the housing.
(Refer to the BD group - "Exterior")
Do not reuse the fuel fill ...
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect a scantool on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refe ...
BlueLink Control Switch Repair procedures
Removal
1.
Remove the Electro chromic Inside rear view mirror.
(Refer to Electro Chromic Inside Rear View Mirror)
Installation
1.
Install the Electro chromic Inside rear view mirror.
(Refer ...