>
Description |
Never attempt to measure the circuit resistance of the Seat
Belt Pretensioner (BPT) even if you are using a specified tester. If the
circuit resistance is measured with a tester, the pretensioner will be
ignited accidentally. This will result in serious personal injury. |
Rear Shock Absorber Repair procedures
Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
•
Be careful not to damage t ...
Intake Actuator Description and Operation
Description
The intake actuator is located at the blower unit. It
regulates the intake door by a signal from the control unit. Pressing
the intake selection switch will shift between recirculat ...
Injector Troubleshooting
Signal Waveform
...