Hyundai Equus: Side Airbag (SAB) Module Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and Operation
| Description |
The Side Airbags (SAB) are installed inside the front seat
and protects the driver and passenger from danger when a side crash
occurs. The SRSCM determines deployment of the side airbag by using the
Side Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using a specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury. |
Passenger Airbag (PAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Disc ...
Side Airbag (SAB) Module Components and Components Location
Components
...
See also:
27 Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordance with the pr ...
Electronic Active Headrest Description and Operation
Description
The electronic active headrest is designed to trigger the
headrest forward and upward when impact sensor detects a rear (or front)
impact.
This helps to prevent the driver's and fr ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com