>
Specifications |
Item | Specifications | ||
Slide, Front/Rear Height | Recline/Cushion/Headrest | ||
Main Power Seat Position Sensor | Operating Voltage | DC 3.8V ~ 24V | |
Consumption Current | Typ 3mA , Max 7mA | ON : 5.7mA(Recline, Cushion) ON : 4.1mA(Headrest) | |
Type | Hall sensor | Hall sensor | |
ON : OFF ratio | 50±15% | 50±10%( Cushion/Headrest) 0.5(Recline) | |
Continuity current | 100mA | 25mA(Cushion/Headrest) 8mA(Recline) | |
Main Power Seat Manual SW | Type | Self return | |
Chattering time | Max 10msec | ||
Limit SW | Type | Open at the adjustment limit position (Normal Close) | |
Contact Current | Max 8A |
Item | Slide | Recline | Height | Headrest | IMS | Cushion extension | Easy Access ON/OFF |
Driver | O | O | O | O | O | O | 1) |
Assist | O | O | X | O | X | X | X |
Rear left | O | X | X | X | X | X | O |
Rear right | O | X | X | O | X | X | O |
Stabilizer Bar Repair procedures
Removal
[Front Stabilizer Bar]
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the stabilizer link (A) ...
Heated Oxygen Sensor (HO2S) Schematic Diagrams
Circuit Diagram
...
Winter driving
More severe weather conditions of winter result in greater wear and other problems.
To minimize winter driving problem, you should follow these suggestions: ...