Hyundai Equus: Specifications
| Specifications |
| Item | Specification | |
| Front/Rear parking assist system control unit | Rated voltage | DC 12V |
| Operation range | 30~120 cm(11.8~47.2 in) | |
| Operation voltage | DC 9V~16V | |
| Operation current | Max. 300 mA | |
| Operation temperature | -30~+80 °C | |
| Operation frequency | 48 ± 5 KHz | |
| Number of sensors | Front : 4EA(Left, Right, Center left, Center right) Rear : 4EA(Left, Right, Center left, Center right) | |
x Front/Rear parking assist control unit function is built in BCM (body control unit).
x Cluster speaker makes buzzer sound, but externer AV AMP makes warning sound.
Components and Components Location
Component Location
1 . Front PAS sensor (4EA)2 . Rear PAS sensor (4EA)3. Indicator (warning information displayed on LCD)4 . Parking Assist System (PAS) switch5 . Body Control Module (BCM)6. Clus ...
See also:
To Reset the Power Trunk
If the battery has been discharged or disconnected, or if the related fuse has
been replaced or disconnected, reset the Power Trunk as follows:
1. Move the shift lever to the P(Park) position.
2. ...
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECT ...
Repair procedures
Removal
Front Blind Camera
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper")
2.
Remove the front blind camera (B) after removing the connector (A) and screws (4EA).
Back ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com