>
Replacement |
|
1. |
Remove both sides of the decoration cover (A). |
2. |
Loosen the mounting screws, then remove the glass (A) by lifting it up.
|
3. |
Carefully lift up the sunroof glass (A) and then remove it. |
4. |
Install in the reverse order of removal.
|
Side Impact Sensor (SIS) Description and Operation
Description
The Side Impact Sensor (SIS) system consists of two kinds of
side impact sensor which are installed at each center of the front door
module (left and right) and two rear sensors whi ...
CVVT (Continuously Variable Valve Timing) System Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance
with the ECM control signal which is calculated by ...
Rear Door Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...