Hyundai Equus: TPMS (Tire Pressure Monitoring System) malfunction indicator
The TPMS malfunction indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System.
Have the system checked by an authorized EQUUS dealer as soon as possible to determine the cause of the problem.
✽ NOTICE
If there is a malfunction with the TPMS, the low tire pressure position telltale will not be displayed even though the vehicle has an underinflated tire.
CAUTION
- The TPMS malfunction indicator may blink for approximately 1 minute and then remain continuously illuminated if the vehicle is moving around electric power supply cables or radio transmitter such as at police stations, government and public offices, broadcasting stations, military installations, airports, or transmitting towers, etc. This can interfere with normal operation of the Tire Pressure Monitoring System (TPMS).
- The TPMS malfunction indicator may blink for approximately 1 minute and then remain continuously illuminated if the snow chains are used or some separate electronic devices such as notebook computer, mobile charger, remote starter or navigation etc., are used in the vehicle. This can interfere with normal operation of the Tire Pressure Monitoring System (TPMS).
Low tire pressure position telltale
When the tire pressure monitoring system warning indicators are illuminated and
warning massage displayed on the cluster LCD display, one or more of your tires
is significantly under-inflated.
...
Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure and Position telltales will come
on. Have the flat tire repaired by an authorized EQUUS dealer as soon as possible
or replace the flat tire with the ...
See also:
Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left
on the tire. Replace the tire when ...
Transmission Oil Temperature Sensor Schematic Diagrams
Circuit Diagram
...
Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when the multi function switch
module detects auto light switch on, tail lamp relay output and head
lamp low relay output are controlled according to auto li ...