>
Troubleshooting |
|
Brake Line Repair procedures
Removal
1.
Remove the wheel & tire.
2.
Remove the brake hose clip (A).
Front
Rear
3.
Disconnect the brake tube by loosening the tube flare nut.
Tightening torque :
12.7 ~ 16.7 N ...
ON/OFF Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above 9.3 mph (15 km/h)
3.Other vehicles are detected in the rear side
If a vehicle is detected within the boundary of the ...