>

Hyundai Equus: Valve Body Components and Components Location - Hydraulic System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Valve Body Components and Components Location

Components Location

1. Input speed sensor
2. Middle speed sensor
3. Output speed sensor
4. E Module
5. Line presure control solenoid valve
6. Damper clutch control solenoid valve
7. ON/OFF solenoid valve
8. Presure switch
9. Valve body assembly
10. 8LR/B control solenoid valve
11. 6/C control solenoid valve
12. 27/B control solenoid valve
13. 35R/C control solenoid valve
14. 4&OD/C control solenoid valve
15. UD/C control solenoid valve

    Valve Body Description and Operation
    Description The valve body is essential to automatic transmission control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pr ...

    Automatic Transmission Control System
    ...

    See also:

    35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    In-car Sensor Repair procedures
    Inspection 1. Turn the ignition switch ON. 2. Blow warm air into the in-car sensor air inlet. Measure the sensor resistance between 1 and 3 terminals. 1. Sensor Ground 2. Motor (-)3. Incar ...

    G Sensor Repair procedures
    Removal     • be careful to avoid excessive external shock. • connectors to avoid damage to the connector pins. G-sensor FL 1. Remove the front bumper. (Refer to ...

    Categories

    Hyundai Equus Manuals


    © 2011-2025 Copyright www.heqmanual.com