>
Front Stabilizer Bar Repair procedures
Replacement
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the stabilizer link (A) from the front strut a ...
Tilt & Telescope Control (SCM) Repair procedures
Inspection
Ims Mode Setting With GDS
1.
You can turn ON/OFF of IMS tilt & telescope control option with the user option program.
2.
Select model and "body control module" menu.
3.
Sel ...
Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery.
2.
Remove the crash pad lower panel (A).
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower panel and then push the bl ...