>
Cool and Warm Box Repair procedures
Replacement
1.
Remove the rear seat cushion and seat back assembly.
(Refer to Body - "Rear Seat Assembly")
2.
Remove the tower console assembly (A).
3.
Remove the rear console armrest (A ...
Air Quality Sensor (AQS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Connect the GDS.
3.
Check the output voltage of AQS between terminal 2 and 3.
1. DC 12V( Ignition)2. Sensor ground3. AQS signal
Specif ...
Opening the Fuel Filler Lid
1. Turn the engine off.
2. Push the fuel filler lid opener button located on the driver’s door. Then the
fuel filler lid slowly open (1).
3. To remove the fuel tank cap (2), turn it counterclock ...