>
Components (1) |
[5:5 Seat] |
1. Rear seat back cover 2. Rear seat cushion cover 3. Rear cushion sponge 4. Rear seat cushion dfroster 5. Rear seat cushion 6. Rear seat headrest guide [RH] 7. Rear seat headrest guide [LH] 8. Rear seat headrest [RH] 9. Rear seat headrest [LH] 10. Leg support assembly 11. Rear seat back frame assembly [RH] | 12. Rear seat back frame assembly [LH] 13. Air blater lumber support wiring harness [RH] 14. Air blater lumber support wiring harness [LH] 15. Air blater lumber support assembly [RH] 16. Air blater lumber support assembly [LH] 17. Rear back duct & plate assembly [RH] 18. Rear back duct & plate assembly [LH] 19. Rear headrest power up / down module [RH] 20. Rear headrest power up / down module assembly [LH] 21. Rear seat air intake grill [LH] 22. Rear seat air intake grill [RH] |
Components (2) |
[6:4 Seat] |
1. Rear seat cushion cover 2. Rear cushion sponge 3. Rear seat cushion dfroster 4. Rear seat cushion 5. Rear seat back assembly | 6. Rear seat back frame assembly 7. Rear back duct plate assembly [RH] 8. Rear back duct plate assembly [LH] 9. Rear headrest power up / down module assembly |
Description and Operation
Description
In the state of IGN1 ON, when the multi function switch
module detects auto light switch on, tail lamp relay output and head
lamp low relay output are controlled according to the ve ...
Heater Unit Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
3.
When the engine is cool, drain the engine coolant fro ...
Compressor Description and Operation
Description
The compressor operates in all events except the system air
filling and two solenoid valves (referred to as reverse valve, on-off
control, and normal open) are embedded.
Air dryer ...