>

Hyundai Equus: Ambient Temperature Sensor Description and Operation - Air Conditioning System - Heating, Ventilation and Air Conditioning - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Ambient Temperature Sensor Description and Operation

Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control.
   
If the ambient temperature is below 1.0°C (33.8°F), the A/C compressor will stop.
The compressor will operate manually.
    Photo Sensor Repair procedures
    Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will ri ...

    Ambient Temperature Sensor Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect ambient temperature sensor. 4. Check the resistance of the ...

    See also:

    Transmission Control Module (TCM) Repair procedures
    Inspection TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check poin ...

    Brake fluid
    Check brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 sp ...

    Engine Mounting Components and Components Location
    Components 1. Engine mounting insulator2. Engine support bracket LH3. Engine support bracket RH4. Transmission mounting insulator ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com