>

Hyundai Equus: Rear Shock Absorber Components and Components Location - Rear Suspension System - Suspension System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Rear Shock Absorber Components and Components Location

Components

1. Insulator cap
2. Lock nuts
3. Bracket assembly
4. Dust cover
5. Bumper stopper
6. Shock absorber

    Components and Components Location
    Components Location 1. Rear shock absorber2. Rear upper arm3. Rear trailing arm4. Rear Assist arm5. Rear sub frame6. Rear disk7. Rear front upper arm ...

    Rear Shock Absorber Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage t ...

    See also:

    Output Speed Sensor Specifications
    Specifications x Type: Hall effect sensor x Specifications Operation condition (°C)°F((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltageHigh1.4Low0.7 ...

    Smart Key Unit Components and Components Location
    Components Connector Pin Information No.Connector AConnector BConnector C1V_BAT loadC_CAN LowSSB illumination ground2-C_CAN High-3Power ground1-SSB LED OFF4IGN1-Interior antenna #2 power5IGN1 rela ...

    To Reset the Power Trunk
    If the battery has been discharged or disconnected, or if the related fuse has been replaced or disconnected, reset the Power Trunk as follows: 1. Move the shift lever to the P(Park) position. 2. ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com