Hyundai Equus: BlueLink Control Switch Components and Components Location

Telemetics Unit (TMU) Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front AVN monitor. (Refer to "Premium AVN System") 3. Remove the MTS unit after loosening the screw and nuts. 4. ...

BlueLink Control Switch Repair procedures

Removal 1. Remove the Electro chromic Inside rear view mirror. (Refer to Electro Chromic Inside Rear View Mirror) Installation 1. Install the Electro chromic Inside rear view mirror. (Refer ...

See also:

Repair procedures
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the front looking sensor to stop functioning. ...

Height Sensor Description and Operation
Description The ground clearance sensor is one component of the ECS system. This sensor is installed between the vehicle body and lower suspension arm. It measures the ground clearance and sen ...

ECU Description and Operation
Description Analyzes each variety sensor and communication data and executes air suspension control. That part controls system and maintains function. ...