Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly") |
3. |
Disconnect the connector from the console upper cover. |
4. |
Remove the front keyboard unit (A) after loosening the mounting screws. |
Installation |
1. |
Install the front keyboard unit to the console upper cover. |
2. |
Install the floor upper cover to the floor console. |
Main components of occupant classification system
A detection device located within the front passenger seat cushion. • Electronic
system to determine whether the passenger air bag systems (both front and side)
should be activated or deactiv ...
Yaw-rate and Lateral G Sensor Repair procedures
Replacement
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable
2.
Remove the floor console.
(Refer to Body - "Console")
3.
Disconnect the yaw rate & lateral G s ...
Head Lamps Components and Components Location
Components
1. Head lamp assembly lens & housing2. Ballast3. Head lamp (Low) bulb (HID) & Ignitor4. Bracket5. Dust cover (Low)6. Vertical adjustment (High/Low)7. Head lamp (High) bulb8. Du ...