>

Hyundai Equus: Front Pillar Trim Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Interior Trim / Front Pillar Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Slighty remove the front door body side weatherstrip.

2.	Remove the front pillar trim.

3.

Install in the reverse order of removal.

•	Replace any damage clips.

Front Pillar Trim Components and Components Location

Component Location 1. Front pillar trim ...

Center Pillar Trim Components and Components Location

Component Location 1. Center pillar lower trim2.Center pillar upper trim ...

See also:

Components and Components Location
Component Location 1. Windshield deicer relay (Built-in engine room junction box)2. Windshield deicer switch3. Windshield deicer4. Deicer connector5. Body control mudule ...

Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. ...

Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com