>

Hyundai Equus: Rear Wheel House Trim Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Wheel House Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Remove the rear seat back assembly. (Refer to Rear Seat - "Rear Seat Assembly")

3.	Remove the rear door scuff trim. (Refer to Interior Trim - "Door Scuff Trim")

4.	Slighty remove the rear door body side weatherstrip.

5.	Using a screwdriver or remover, remove the rear wheel house trim (A).

6.

Install in the reverse order of removal.

•	Replace any damage clips.

Rear Wheel House Trim Components and Components Location

Component Location 1. Rear wheel house trim ...

Rear Package Tray Trim Components and Components Location

Component Location 1. Rear package tray trim ...

See also:

Accelerator Position Sensor (APS) Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors ...

MTS Antenna Components and Components Location
Components ...

VSM OFF Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") 3. Remove the TORX screws to rem ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com