>
Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above 9.3 mph (15 km/h)
3.Other vehicles are detected in the rear side
If a vehicle is detected within the boundary of the ...
Inhibitor Switch Repair procedures
Inspection
•
Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
Power Circuit Inspection
1. ...
Recalling Position into Memory
1. Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2. Press the desired memory button (1 or 2). The system will beep once, then the
driver's ...