>

Hyundai Equus: Pre-safe seat belt (PSB) (if equipped) - Seat belts - Safety features of your vehicle - Hyundai Equus 2009-2024 Owners ManualHyundai Equus: Pre-safe seat belt (PSB) (if equipped)

The purpose of the pre-safe seat belt is to tighten the seat belt during emergency


The purpose of the pre-safe seat belt is to tighten the seat belt during emergency braking, or when a loss of control is sensed.

CAUTION

The pre-safe seat belt activates only when the passenger is wearing his/her seat belt.

The pre-safe seat belt warning light will illuminate if a malfunction is detected


The pre-safe seat belt warning light will illuminate if a malfunction is detected with your pre-safe seat belt.

Have the system checked if:

  • • The light comes on while the vehicle is in motion.

In order to maximize the safety of the passenger, the pre-safe seat belt system operates as below

  • • The seat belt is tightened when:

- Emergency braking situation occurs
- Losing control of the vehicle
- The passenger leans to one side

  • • The seat belt vibrates when:

- The Lane Departure Warning System (if equipped) detects the vehicle has moved out of its lane

CAUTION

Do not be surprised when the seat belt vibrates. It's not a malfunction but a warning for your safety.

Other functions are winding a loose seat belt after unfastening the seat belt.

    Pre-tensioner seat belt
    Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly against the occup ...

    Seat belt precautions
    WARNING All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a coll ...

    See also:

    Battery Repair procedures
    Removal 1. Disconnect the battery sensor connector (A), battery nagative terminal (B) and positive terminal (C). 2. Disconnect the vent hose connector (A) from the battery air vent hole. 3. ...

    Mode Control Actuator Description and Operation
    Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. ...

    Changing the engine oil and filter
    Have engine oil and filter changed by an authorized EQUUS dealer according to the Maintenance Schedule at the beginning of this section. CALIFORNIA PROPOSITION 65 WARNING Engine oil contains c ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com