>
ESP OFF Switch Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable
2.
Remove the crash pad side cover.
3.
Remove the lower panel.
(Refer to Body - "Crash Pad")
4.
Re ...
Assist Handle Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Air Spring Description and Operation
Description
Because of the design layout, the air spring and the shock
absorber (damper) is separated. The average (target) pressure of rear
air spring for normal operation is around 8.5 bar.
...