>
If a tire goes flat while you are driving:
1.Take your foot off the accelerator pedal and let the car slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control.
When the car has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on firm, level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes.
2.When the car is stopped, turn on your emergency hazard flashers, set the parking brake and put the shift lever in P.
3.Have all passengers get out of the car. Be sure they all get out on the side of the car that is away from traffic.
4.When changing a flat tire, follow the instruction provided later in this section.
Description and Operation
Description
When reversing, the driver is not easy to find objects in the
blind spots and to determine the distance from the object. In order to
provide the driver safety and convenience, back ...
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Fuel Pump Control Module (FPCM) Schematic Diagrams
Circuit Diagram
...