When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.
✽ NOTICE
The front tire size is different from the rear tire size. So when you rotate tires, check the tire and wheel size.
WARNING
A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, body-to-tire clearance, snow chain clearance, speedometer and odometer calibration, headlight aim and bumper height.
Memory Power Seat Unit (IMS & PSM) Repair procedures
Removal
1.
Remove the negative(-) battery terminal.
2.
Remove the seats in the car.
(Refer to Body - "Front Seat Assembly")
3.
Remove the IMS & PSM module (A) after loosening 4 screws ...
Parking Assist Sensor Repair procedures
Removal
[Front Bumper]
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector from the front bumper cover.
(Refer to Body - "Front Bumper Cover")
3.
Pull out the se ...
Keep paint and trim in good condition
Scratches or chips in the finish should be covered with "touch-up" paint as soon
as possible to reduce the possibility of corrosion. If bare metal is showing through,
the attention of a ...