Hyundai Equus: Battery Troubleshooting

Battery Repair procedures

Removal 1. Disconnect the battery sensor connector (A), battery nagative terminal (B) and positive terminal (C). 2. Disconnect the vent hose connector (A) from the battery air vent hole. 3. ...

Battery Sensor Description and Operation

Description Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power s ...

See also:

Windshield Wiper-Washer Switch Repair procedures
Removal 1. Remove the steering column upper and lower shrouds after loosening screws. 2. Disconnect the multifunction switch connector (A). 3. Remove the wiper & washer switch (A) by p ...

ON/OFF Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Rear Seat Cushion Cover Repair procedures
Replacement [LH]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and app ...