Fail-safe mode |
ITEMS | FAIL-SAFE | |
ETC Motor | Throttle valve stuck at 5° | |
TPS | TPS 1 fault | Replace it with TPS2 |
TPS 2 fault | Replace it with TPS1 | |
TPS 1,2 fault | Throttle valve stuck at 5° | |
APS | APS 1 fault | Replace it with APS2 |
APS 2 fault | Replace it with APS1 | |
APS 1,2 fault | Throttle valve stuck at 5° |
When throttle value is stuck at 5°, engine speed is limited
at below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~
31mph). |
Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when the driver begins
to accelerate after a stop. The Hill-start Assist Control (HAC) prevents the vehicle
from rolling back by operating t ...
Front Seat Belt Pretensioner Repair procedures
Replacement
•
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the safety belt (A) by turning it in the direction of arrow using a flat- ...
Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram
...