Hyundai Equus: Accelerator Position Sensor (APS) Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Control/Fuel System / Engine Control System / Accelerator Position Sensor (APS) Specifications
| Specification |
| Accelerator Position | Output Voltage (V) | |
| APS1 | APS2 | |
| C.T | 0.7 ~ 0.8 | 0.33 ~ 0.43 |
| W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |
Accelerator Position Sensor (APS) Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors ...
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
...
See also:
Air Spring Description and Operation
Description
Because of the design layout, the air spring and the shock
absorber (damper) is separated. The average (target) pressure of rear
air spring for normal operation is around 8.5 bar.
...
Troubleshooting
Troubleshooting
SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Worn crankshaft bearings.Loose or damaged engine drive plate.Replace the crankshaft and bearings ...
Fluid Repair procedures
Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during
scheduled services. If an oil leak is found, perform the oil level chec ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com