>
(1) Power Trunk Main Control button
(2) Power Trunk Open button
(3) Power Trunk Close button
(4) Power Trunk Lock button
To open:
1. Make sure the shift lever is in P(Park).
2. Then do one of the following:
- Press the Smart Key Trunk Unlock button for more than one second.
- Press the Open button on the trunk. You need the Smart Key in your possession,
when all doors are locked.
- Press the Power Trunk Main Control button.
To close:
Do one of the following:
- Press the Power Trunk Main Control button until the Power Trunk is closed securely.
- Press the Close button on the trunk.
- Press the Lock button on the trunk while carrying the Smart Key and all the vehicle’s
doors are closed.
All doors will lock and arm the theft alarm system.
If you push a button or switch while the trunk is opening or closing, it could stop moving. Press any button to operate the Power Trunk again.
✽ NOTICE
The Power Trunk Lock button will not work if you press the button when:
- Any door is open.
- The Engine Start/Stop Button is not in the OFF position.
- The Smart Key is in the vehicle.
WARNING
Never leave children or animals unattended in your vehicle. Children or animals might operate the power trunk that could result in injury to themselves or others, or damage to the vehicle.
WARNING
Always keep the trunk lid completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle and serious illness or death may result.
WARNING
Make sure there are no people or objects around the trunk before opening or closing the Power Trunk.Wait until the trunk is open fully and stopped before loading or unloading cargo from the vehicle.
CAUTION
✽ NOTICE
In cold and wet climates, trunk lock and trunk mechanisms may not work properly due to freezing conditions.
Power Trunk Non-Opening or Closing Conditions:
Automatic stop and Reverse
If, during power opening or closing, the trunk is blocked by an object or part of someone’s body, the power trunk will detect the resistance and it will stop movement or move to the full open position to allow the object to be cleared.
However, if the resistance is weak such as from an object that is thin or soft, or the trunk is near the latched position, the automatic stop and reversal may not detect the resistance and the closing operation will continue. Also, if the Power Trunk is forced by a strong impact, the automatic stop and reversal may operate.
If the automatic stop and reverse feature operates more than twice during one opening or closing operation, the Power Trunk may stop at that position. If this occurs, close the trunk manually and operate the trunk automatically again.
WARNING
To prevent serious injury and damage take the following precautions when operating the power trunk:
- Keep all faces, hands, arms, body parts and other objects away from the
path of the power trunk.
- Do not intentionally place any body parts or objects in the path of the power
trunk to make sure the automatic stop and reversal operates.
- Do not allow children to play with the power trunk.
Front / Rear Parking Assist System Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the BCM unit.
(Refer to Body Control Module - "Body Control Module")
Installation
1.
Install the BCM unit.
2.
Conne ...
Exhaust Manifold Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the engine room cover (A ...
Description and Operation
Description
System Operation
Typically, lane departure warning is activated at a speed
over 70 km/h, but suppressed in case of unintentional lane departure
when driver do not operate turn sign ...