Hyundai Equus: To Reset the Power Trunk
Second generation VI (2009–2024) / Hyundai Equus 2009-2024 Owners Manual / Features of your vehicle / Trunk / To Reset the Power Trunk
If the battery has been discharged or disconnected, or if the related fuse has been replaced or disconnected, reset the Power Trunk as follows:
1. Move the shift lever to the P(Park) position.
2. Close the trunk manually.
If the Power Trunk doesn't work properly after performing the above procedure, have the system checked by an authorized EQUUS dealer.
Power Trunk (if equipped)
(1) Power Trunk Main Control button
(2) Power Trunk Open button
(3) Power Trunk Close button
(4) Power Trunk Lock button
To open:
1. Make sure the shift lever is in P(Park).
2. Then do one o ...
Trunk Lid Control Button
When the trunk lid control button is ON (depressed), the power trunk can be controlled
with the power trunk main control button, power trunk open, close button, and the
smart key.
When this t ...
See also:
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Turn the engine OFF.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console assembly.
(Refer to Body - ...
Fuel Pump Control Module (FPCM) Schematic Diagrams
Circuit Diagram
...
Repair procedures
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accordance with the procedure for that DTC. (Refer to
DTC guide)
...
Categories
Hyundai Equus Manuals
