Hyundai Equus: Components and Components Location
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Components and Components Location
| Components Location |
| 1. Fuel tank 2. Fuel pump 3. Sub fuel sender 4. Fuel filter 5. Over Pressure Valve (OPV) 6. Canister 7. Fuel tank air filter | 8. Fuel Pressure Sensor (FPS) 9. Fuel Level Sensor (FLS) 10. Fuel Filler Hose 11. Leveling Hose 12. Ventilation Hose 13. Fuel Tank Band |
| [High Pressure Fuel Line] |
| 1. High Pressure Fuel Pump 2. High Pressure Fuel Pipe | 3. Delivery Pipe 4. Injector |
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure fuel. So don’t do any repair
work right after engine stops. |
Troubleshooting
Troubleshooting
•
Check the fuel pressure after replacing parts.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
...
See also:
Smart cruise control vehicle to vehicle distance
To set vehicle to vehicle distance:
This function allows you to program the vehicle to maintain relative distance
to the vehicle ahead without depressing the accelerator pedal or brake pedal.
...
Presure Switch Description and Operation
Description
The oil pressure switch detects any abnormal hydraulic pressure to the 35R clutch in the N range. ...
Instrument Cluster Control
Adjusting Instrument Cluster Illumination
The brightness of the instrument panel illumination can be adjusted by pressing
the illumination control buttons (“+” or “-”) when the Engine Start/Sto ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com