>
Specification |
Pressure(kPa) | Output Voltage(V) |
50 | 0.3 |
600 | 2.5 |
1100 | 4.5 |
Power Trunk Module Drive Unit Repair procedures
Removal
•
When removing and installing the trunk lid, an assistant is necessary.
•
Take care not to be closed the trunk when removing the push rod.
•
Wear glove ...
Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at
idle speed, and let the air conditioning work for a few minutes, then
shut the engine off.
2.
Disconnect the negative ...
Master Cylinder Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the cover.
3.
Disconnect the ECM connector (A) and TCM connector (B). And then take the protect ...