>

Hyundai Equus: Fluid Components and Components Location - Hydraulic System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Fluid Components and Components Location

Components Location

1. Oil injection hole
2. Oil level check plug
3. Oil drain piug

    Oil Pump Components and Components Location
    Components Location 1. Oil seal2. Reaction shaft3. Housing4. Cover5. O-Ring6. Reaction shaft7. Snap ring8. Needle bearing9. 8LR/B return spring10. 8LR/B piston ...

    Fluid Repair procedures
    Service Adjustment Procedure Oil level Check     A check of ATF level is not normally required during scheduled services. If an oil leak is found, perform the oil level chec ...

    See also:

    Engine And Transmission Assembly Repair procedures
    Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. ...

    Brake discs, pads, calipers and rotors
    Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. ...

    Side Impact Sensor (SIS) Description and Operation
    Description The Side Impact Sensor (SIS) system consists of two kinds of side impact sensor which are installed at each center of the front door module (left and right) and two rear sensors whi ...

    Categories

    Hyundai Equus Manuals


    © 2011-2025 Copyright www.heqmanual.com