Hyundai Equus: Output Speed Sensor Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Output Speed Sensor Specifications
| Specifications |
x Type: Hall effect sensor
x Specifications
| Operation condition (°C)°F | ((-)40~150)) -40~302 | |
| Air gap(mm)in. | 1.3(0.0512) | |
| Output voltage | High | 1.4 |
| Low | 0.7 | |
Output Speed Sensor Description and Operation
Description
The output speed sensor is a vital unit that measures the
rate of rotation of the transmission's turbine shaft and output shaft,
and delivers the readings to the TCM. The sensor pr ...
Output Speed Sensor Schematic Diagrams
Circuit Diagram
...
See also:
Tire chains
Tire chains, if necessary, should be installed on the drive wheels (rear wheels).
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and c ...
Brake Line Repair procedures
Removal
1.
Remove the wheel & tire.
2.
Remove the brake hose clip (A).
Front
Rear
3.
Disconnect the brake tube by loosening the tube flare nut.
Tightening torque :
12.7 ~ 16.7 N ...
Fuel Pump Motor Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
"Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -""Release Residual Pres ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com