Adjustment |
1. |
After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or right or left. |
2. |
Adjust the trunk lid height by turning the trunk lid overslam bumpers (B). |
3. |
After loosening the trunk lid striker (C) mounting bolts,
adjust the trunk lid striker by moving it up or down, or right or left. |
Rear Seat Frame Assembly Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply pro ...
Front Rear Parking Assist System Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower panel and then push t ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention.
Supplemental Restra ...