Hyundai Equus: Parking Assist Sensor Schematic Diagrams

Front / Rear Parking Assist System Control Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the BCM unit. (Refer to Body Control Module - "Body Control Module") Installation 1. Install the BCM unit. 2. Conne ...

Parking Assist Sensor Repair procedures

Removal [Front Bumper] 1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector from the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Pull out the se ...

See also:

Power Striker Repair procedures
Inspection Power Trunk Lid Inspection With GDS 1. Check the power trunk module input/output value by using the GDS. If the operation of power trunk module is abnormal, replace power trunk dri ...

Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Installation is the ...

Front Seat Frame Assembly Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...