>

Hyundai Equus: ON/OFF Solenoid Valve Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: ON/OFF Solenoid Valve Specifications

Specifications
ON/OFF Solenoid Valve
x Control type : Normal low type
Control pressure kpa (kgf/cmx, psi)
539.36
(5.5, 78.23)
 Internal resistance(x)
10~11

    ON/OFF Solenoid Valve Description and Operation
    Description ON/OFF solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. ...

    ON/OFF Solenoid Valve Schematic Diagrams
    Circuit Diagram ...

    See also:

    Tire maintenance
    In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. When you have new tires instal ...

    Heated Steering wheel Description and Operation
    Descrption and Operation The steering wheel heating system will not be active with an ambient temperature above the system set point temperature. The steering wheel heater element is connected ...

    Trailing Arm Repair procedures
    Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the trailing arm (A) from the rear axle by loosening ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com