Hyundai Equus: Rail Pressure Sensor (RPS) Specifications

Rail Pressure Sensor (RPS) Description and Operation

Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in ...

Rail Pressure Sensor (RPS) Troubleshooting

Signal Waveform ...

See also:

Hood Latch Repair procedures
Replacement 1. Remove the hood latch cover (A) mounting clip. (Refer to Engine Mechanical System - "Active Air Flap(AAF)") 2. Loosen the hood latch (B) mounting bolts. Tightening torque : ...

Manifold Absolute Pressure Sensor (MAPS) Specifications
Specification Pressure[kPa (kgf/cmx, psi)]Output Voltage (V)20.0 (0.20, 2.9)0.7946.7 (0.47, 6.77)1.84101.3 (1.03, 14.7)4.0 ...

Rear Door Outside Handle Repair procedures
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the rear door outside handle cover (A). Tightening torque : 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ...