Hyundai Equus: Smart Cruise Control Unit Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Electrical System / Smart Cruise Control System / Smart Cruise Control Unit Description and Operation
| Description |
The smart cruise control unit is installed on the front
center of the chassis. A radar sensor is embedded in the front section
of the unit. This sensor detects vehicles and objects in front of the
vehicle.The radar sensor can detect up to 64 objects ahead of a vehicle.
The alarm goes off when the vehicle deviates from the horizontal and
vertical alignment reference points during operation. This sensor
communicates with the dashboard, warning buzzer, smart cruise control
switch, Electronic Stability Program (ESP), ECM, and TCM via CAN
communication.The sensor controls vehicle speed through CAN
communication between the Electronic Stability Program (ESP) system and
the ECM and TCM.
Description and Operation
Description
The smart cruise control system allows a driver to program
the vehicle to control the speed and following distance detecting the
vehicle ahead without depressing the brake pedal and ...
Smart Cruise Control Unit Specifications
Specification
ItemSpecificationPower supply(V)12Operation voltage (V)9 ~ 16
...
See also:
Compressor Description and Operation
Description
The compressor operates in all events except the system air
filling and two solenoid valves (referred to as reverse valve, on-off
control, and normal open) are embedded.
Air dryer ...
Cargo weight
This figure includes all weight added to the Base Curb Weight, including cargo
and optional equipment. ...
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when the headlamp high beams are switched
on.
To prevent the ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com