>
To open the box, pull up the lever(1).
If you press the operate button (2) once, the indicator on the button will be illuminated blue and then you can keep drinks cool. If you press the operate button (2) once more, the indicator on the button will be changed to amber and then you can keep drinks warm.
To stop operating, press the operate button (2) once more. The indicator on the button will be turned off.
It takes about 5 minutes to swift from warming mode to cooling mode or from cooling mode to warming mode.
There are partitions in the box to fix the drink. You can remove the partitions to fit bigger size bottles. Be careful not to damage the partitions.
CAUTION
CAUTION
There is the air inlet at the center of the rear seat and the air outlet at the inside of the trunk. If the air inlet is blocked, the efficiency will be lower. If the air inlet is blocked for a long time, the box may be damaged. Do not let the air inlet and outlet be blocked.
Canister Close Valve (CCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
Repair procedures
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
3.
...
Programming HomeLink®
✽ NOTICE
When programming a garage door opener, it is advised to park the vehicle
outside of the garage. • It is recommended that a new battery be placed in the
hand-held transmitter ...