>
Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off.
2. Remove the fuse panel cover by pressing the tab and pulling up.
3. Check the removed fuse; replace it if it is blown. To remove or insert ...
Programming
To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons (
,
), HomeLink® Channel 1 and Channel 3, until the indicator light begins ...
LDWS operation
To operate the LDWS, pull the switch with the Engine Start/Stop Button in the
ON position. The indicator illuminates on the cluster. To cancel the LDWS, pull
the switch again.
LDWS indicator li ...