>

Hyundai Equus: Power Trunk Module Drive Unit Components and Components Location - Power Trunk Module - Body Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Power Trunk Module Drive Unit Components and Components Location

Component Location

1. Gear motor
2. Drive bracket
3. Push rod
4. Gear
5. Drive arm
6. Power trunk module control unit
7. Push rod pin

    Troubleshooting
    Troubleshooting Diagnosis And Testing - Power Trunk Lid System The power trunk lid system is a complex system containing many components. In order to perform conclusive testing, or receive out ...

    Power Trunk Module Drive Unit Schematic Diagrams
    Circuit Diagram ...

    See also:

    Thermostat Repair procedures
    Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 4.0~6.0N.m (0.4~0.6kgf.m, 3.0~4.4lb-ft) 2. Remove the air duct, air intak hose and ...

    Purge Control Solenoid Valve (PCSV) Description and Operation
    Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ...

    Special Service Tools
    Special Service Tools ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com