Hyundai Equus: Schematic Diagrams
| System Diagram |
| 1. Front view camera 2. PGS Unit 3. AVN monitor (LCD) | 4. Front blind camera switch 5. Rear view camera |
Block Diagram & Communications
| Category | Role | Voltage | I/O |
| Ignition Power | · Routes power to PGS. | IGN ON: 12 VIGN OFF: 0V | Input |
| Blind Switch | · Controls the rear view camera (by controlling whether or not
the rear view camera feed is displayed on screen).· Rear view camera
is activated whenever the A/T lever is in R gear. | NORMAL: 12 VPUSH: 0V | Input |
| Power Train CAN | · Steering angle, velocity, and inhibitor switch data. | | Input |
| Multimedia CAN | · DIS: Shares parking direction and parking stage-specific
status info.· AVN: Sends and receives forward view camera, rear view
camera, and camera deactivation commands. | | Input |
| Camera Power | · Camera operation power | While transmission is in neutral,voltage between camera powersupply and ground is measured tobe 6.5V. | Output |
| Camera Ground | |||
| Camera View Change | · Provides a virtual top view using the standard rear view camera feed. | Serial Communication Line | Output |
Description and Operation
Description
Control Function
This system supports 3 kinds of main function.(Front/Rear
video display function, Expected trace of wheels display function,
Parking guide function)
The Front/Rea ...
See also:
Front Seat Belt Pretensioner Repair procedures
Replacement
•
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the safety belt (A) by turning it in the direction of arrow using a flat- ...
Front fog light
Fog lights are used to provide improved visibility and avoid accidents when visibility
is poor due to fog, rain or snow etc. The fog lights will turn on when fog light
switch (1) is turned to ...
Rail Pressure Sensor (RPS) Troubleshooting
Signal Waveform
...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com