>
Components |
Pin NO. | Item | Description |
1 | Upper body | 3-phase coil power supply, fuel delivery, and sealing |
2 | Stator assembly | Creates an N pole and S pole flux to induce the rotor to turn. |
3 | rotor assembly | Torque is generated by the N pole and S pole flux of the stator. |
4 | cover pump | Creates pressure to supply fuel. |
5 | impeller | The turning rotor generates the pressure and flow rate of the fuel. |
6 | body assembly | Takes in the fuel mixture and pressurizes it. |
7 | housing | Protects and seals components. |
|
ESP Control Unit Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable
2.
Remove the Engine room junction box after removing the cover.
3.
Disconnect the brake tubes from the HE ...
Trunk Lid Weatherstrip Repair procedures
Replacement
1.
Remove the trunk lid weatherstrip (A).
•
Do not apply sealant to the body.
2.
Install in the reverse order of removal.
•
...
Repair procedures
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cover the front looking sensor to stop functioning.
...