>

Hyundai Equus: Hydraulic System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Hydraulic System

Automatic Transmission Repair procedures
Removal 1. Disconnect (-) terminal from the battery.     The battery is placed right side of the temporary tire in the trunk. 2. Remove the under cover (A). 3. Remove ...

Description and Operation
Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filt ...

See also:

Output Speed Sensor Repair procedures
Inspection 1. Check signal waveform of output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

6 Speed Clutch Control Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Input Speed Sensor Repair procedures
Inspection 1. Check signal waveform of Input speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Categories

Hyundai Equus Manuals


© 2011-2025 Copyright www.heqmanual.com