>
Specifications |
Operation condition (°C)°F | ((-)40~150)) -40~302 | |
Air gap(mm)in. | 1.3(0.0512) | |
Output voltage(V) | High | 1.4 |
Low | 0.7 |
External AMP Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Open the trunk, remove the right trunk trim.
(Refer to Body - "Trunk Trim")
3.
Remove the external amplifier after disconneting ...
Yaw-rate and Lateral G Sensor Repair procedures
Replacement
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable
2.
Remove the floor console.
(Refer to Body - "Console")
3.
Disconnect the yaw rate & lateral G s ...
Fluid Repair procedures
Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during
scheduled services. If an oil leak is found, perform the oil level chec ...