>
Sunroof Motor Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console then remove the sun roof motor
mounting screws (3EA). And then remove the sunroof motor (A) after ...
Heated Oxygen Sensor (HO2S) Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic
Converter. The sensor output voltage varies in ...
Trunk Lid Back Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...