>
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Power Trunk Module Drive Unit Repair procedures
Removal
•
When removing and installing the trunk lid, an assistant is necessary.
•
Take care not to be closed the trunk when removing the push rod.
•
Wear glove ...
Repair procedures
Replacement
•
Be careful not to damage the fender and body.
•
When removing the clips, use a clip remover.
1.
Loosen the front wheel gua ...